BHT-M80 Mobile Computer

Scanning excellence at its core.
World-class scanning performance thanks to DENSO's best scan engine to date. Whether crinkled, smeared over, poorly printed or even on and behind highly reflective surfaces - with the BHT-M80 data acquisition device you can capture even the most difficult labels quickly and easily. The high reading range rounds off the profile.

Superior reading speed.
With 30 scans per second, the BHT-M80 handheld terminal captures codes faster than you can see. This high reading speed enables the user to scan several labels one after the other with a fluid hand movement (trace scanning) instead of the slow stop-and-go variant, which in turn saves time and money.

Intuitive handling thanks to the Android operating system.
The BHT-M80 handheld terminals are equipped with Android 10 as standard (a later upgrade to Android 11 is possible). The advantage of Android is very clear: it is an intuitive operating system that the majority of users should be familiar with through their smartphones, which in turn means short phases of familiarization with the use of the BHT-M80. This gives employees a familiar user experience and enables them to get started right away, which in turn saves time and money for the company.

Powerful processor for uninterrupted mobile data acquisition.
Equipped with a Qualcomm® SDM660 octa-core processor, the BHT-M80 delivers maximum performance, even with several processes running at the same time. Your employees are able to work without unnecessary interruptions.

Characteristic of DENSO mobile computers: the angled scan head.
When developing our handheld terminals, we have one aspect very clearly in mind: the user. For maximum user-friendliness, the scan head is angled in such a way that a natural hand posture can be taken while scanning and that the user is able to have a full view of the display during the reading process. The special feature of the M80 series is the 40 ° scanning angle, which not only offers the ergonomic advantages mentioned, but also allows the device to easily read labels behind or on highly reflective surfaces such as glass or metal.

*1. The LCD display is manufactured with precise technology.The rate of non-defective pixels is 99.99% or more, which means that 0.01% or less pixels
could be stuck or dead.
*2. A license is required.
*3. Dragontrail® Pro is a registered trademark of AGC Inc.
*4. Before using the NFC function, perform test reading sufficiently using the target NFC card.
*5. A headset or headphone can be connected through the USB Type-C cable. A USB Type-C-to-audio jack (3.5 mm) conversion cable is optional.
*6. 0°C to 40°C during charging.
*7. These are the values tested at a room temperature, and not guaranteed values.
*8. The operating time is a reference value at a room temperature and may differ depending on the operating conditions.
*9. This is a result of measurement based on the JEITA HT Standard Operation Mode G, and may change depending on the operating environment and
system settings.

• SDK
• Scan Settings
• BHT Browser
• BHT Link
• BHT Settings
• BHT DMS
• Battery Monitor
• WLAN Manager
• BHT Remote
• Application Launcher
• BHT Security Package