BHT-M80 Mobile Computer

BHT-M80 Mobile Computer

DENSO's most powerful handheld terminal.

The mobile computers of the BHT-M80 series are the result of a continuous pursuit of perfectionism: equipped with the most powerful DENSO scan engine on the market to date, these handheld terminals deliver a scanning performance that sets the bar high in the industry. In combination with the Android 10 operating system and a powerful octa-core processor, the M80 becomes an indispensable companion for reliable and fast mobile data acquisition.

  • 1D Code
  • 2D Code
  • NFC
  • Android

Haben Sie Fragen?

Sie interessieren sich für unsere Produkte, haben aber noch weitere Fragen. Hier finden Sie einen Vertriebspartner in Ihrer Nähe.

Vertriebspartner finden

  • Scanning excellence at its core.
    World-class scanning performance thanks to DENSO's best scan engine to date. Whether crinkled, smeared over, poorly printed or even on and behind highly reflective surfaces - with the BHT-M80 data acquisition device you can capture even the most difficult labels quickly and easily. The high reading range rounds off the profile.

    Superior reading speed.
    With 30 scans per second, the BHT-M80 handheld terminal captures codes faster than you can see. This high reading speed enables the user to scan several labels one after the other with a fluid hand movement (trace scanning) instead of the slow stop-and-go variant, which in turn saves time and money.

    Intuitive handling thanks to the Android operating system.
    The BHT-M80 handheld terminals are equipped with Android 10 as standard. The advantage of Android is very clear: it is an intuitive operating system that the majority of users should be familiar with through their smartphones, which in turn means short phases of familiarization with the use of the BHT-M80. This gives employees a familiar user experience and enables them to get started right away, which in turn saves time and money for the company.

    Powerful processor for uninterrupted mobile data acquisition.
    Equipped with a Qualcomm® SDM660 octa-core processor, the BHT-M80 delivers maximum performance, even with several processes running at the same time. Your employees are able to work without unnecessary interruptions.

    Characteristic of DENSO mobile computers: the angled scan head.
    When developing our handheld terminals, we have one aspect very clearly in mind: the user. For maximum user-friendliness, the scan head is angled in such a way that a natural hand posture can be taken while scanning and that the user is able to have a full view of the display during the reading process. The special feature of the M80 series is the 40 ° scanning angle, which not only offers the ergonomic advantages mentioned, but also allows the device to easily read labels behind or on highly reflective surfaces such as glass or metal.

  • Model BHT-M80-QWG BHT-M80-QW
    OS AndroidTM 10
    Processor Qualcomm® SDM660 Octa-core  2,2 GHz x 4 + 1,8 GHz x 4
    Memory RAM 4 GB
    Flash ROM 64 GB
    Display Size & Resolution *1 5” HD (720×1280)
    Display Dot Matrix Liquid Crystal Display (colour) *1
    Back light Wihte LED
    Reader Reading method Area sensor
    Supported code 2D Code QR Code, Micro QR Code, SQRC, PDF417, Micro PDF417, Maxi Code, Data Matrix (ECC200), and GS1 Composite
    Barcode EAN-13/8 (JAN-13/8), UPC-A/E, UPC/EAN (with add-On), Interleaved 2 of 5, Codabar (NW-7), CODE39, CODE93, CODE128, GS1-128 (EAN-128), Standard 2 of 5 (STF) and GS1 DataBar(RSS)
    OCR Supported *2
    Minimum resolution 2D Code 0,127 mm
      Barcode 0,076 mm
    Marker Cross Guide Marker
    Reading confirmation Blaue LED, Ton und Vibration
    Keys Number of keys 5 keys (including power key) + 2 trigger keys
    Touch panel Asahi DragontrailTM Pro *3 - wet touch / gloved fingertip / stylus
    Communication Wireless LAN connection Standard IEEE802.11a/b/g/n/ac and MU-MIMO 2x2
    Frequency 5 GHz-band (W52, W53, and W56, W58) 2.4 GHz-band (1 to 13 channels)
    Security Encryption: WEP, TKIP, and AES
    WPA authentication: WPA and WPA2 and WPA3
    User authentication: PSK, EAP-TLS, and PEAP
    WWAN Supported: GSM/W-CDMA/LTE und VoLTE
      FDD-LTE (4G) - Bands 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 19, 20, 25, 26, 28
      W-CDMA/UMTS/HSPA/HSPA+ (3G) - Bands 1, 2, 5, 6, 8, 19
      GSM/GPRS/EDGE (2G) - Bands 850, 900, 1800, 1900MHz
    -
    GPS A-GPS/GLONASS/QZSS/BeiDou/Galileo -
    Bluetooth Bluetooth® Ver5.1+EDR/LE
    Unterstützte Profile: RFCOMM/A2DP/AVCTP/ACDTP/GVDP/AVRCP/DUN/DI/HFP/HID/HSP/IOP/MAP/OPP/BNEP/PAN/PBAP/SAP/SPP
    USB USB2.0 (Type-C)
    NFC *4 ISO/IEC14443A&B and FeliCa, ISO/IEC15693 (RFID)
    Camera Front 5MP autofocus, Rear 13MP autofocus
    Card slot

    Micro SD (SDHC, SDXC (~128 GB))
    SDHC speed class 4 supported

    Dual nanoSIM DSDV (4Gx4G)

    Microphone receiver Attached *5
    Speaker 90dB or more at 10 cm away (at 2.8kHz)
    Sensor G-sensor, gyro sensor, proximity sensor, light intensity sensor, and geomagnetic sensor
    Power supply Main battery Lithium-ion-battery: 4.020 mAh / 5.800 mAh
    Wireless Charging Supported (excl. battery and charger)
    Quick Charging Supported (Quick charge 3.0)
    Operating time *8 2,900 mAh battery: 14hours *9 / 4,020mAh battery: 20hours *9  / 5,800mAh battery: 29hours *9
    Environmental requirements Operating temperature *6 -20 °C to 50 °C
    Operating humidity 20 to 80%RH (non-condensing and non-icing)
    Protection rating *7 IP65 / IP67
    Drop resistance *7 3,0 m, 1,5 m x 60 drops
    Weight (incl. battery) ca. 365g (4.020 mAh) / ca. 395g (5.800 mAh) *10

    *1. The LCD display is manufactured with precise technology.The rate of non-defective pixels is 99.99% or more, which means that 0.01% or less pixels
    could be stuck or dead.
    *2. A license is required.
    *3. Dragontrail® Pro is a registered trademark of AGC Inc.
    *4. Before using the NFC function, perform test reading sufficiently using the target NFC card.
    *5. A headset or headphone can be connected through the USB Type-C cable. A USB Type-C-to-audio jack (3.5 mm) conversion cable is optional.
    *6. 0°C to 40°C during charging.
    *7. These are the values tested at a room temperature, and not guaranteed values.
    *8. The operating time is a reference value at a room temperature and may differ depending on the operating conditions.
    *9. This is a result of measurement based on the JEITA HT Standard Operation Mode G, and may change depending on the operating environment and
    system settings.

  • Software Description Part No.
    SDK Software Development Kit (SDK) for Android 10  
    Scan Settings    
    BHT Browser   496490-1020
    BHT Link Development tool or transmitting and receiving files between Android BHT and a PC  
    BHT Settings    
    BHT DMS Device Management System  
    Battery Monitor    
    WLAN Manager    
    BHT Remote    
    Application Launcher    
    BHT Security Package App for visualzing device control, firewall and security incidents  

     

  • Communication unit / Charger    
    USB type charger Adapter sold separately (AD3). CU-M80U
    USB type charger (QC3.0) Adapter sold separately (AD8). CU-M80UQ
    LAN type charger Adapter sold separately (AD3). CU-M80L
    4-slot-unit-charger Charge up to four terminals at the same time. Adapter sold separately (AD3). CH-M80-4
    4-slot-battery-charger Charge up to four batteries at the same time. Adapter sold separately (AD3). CH-BT1-4
    AC Adaptor   AD3
    AC Adaptor (QC3.0) Quick Charge ™ 3.0 (Requires USB-C conversion cable to charge the BHT terminal, sold separately.) AD8
    Batteries    
    Lithium-ion Battery 4020 mAh BT1
    Lithium-ion Battery 5800 mAh BT1L
    Lithium-ion Battery for Wireless Charging 2900 mAh BT1S-W
    Others    
    Hand belt   HBBHT-M80
    Waist case    
    Stylus   STBHT-1700
    Cable USB type-c conversion cable (1,5 m) CB00-US1500/4A-4C

     

Contact

Would you like to speak to a sales partner in your area directly?

Would you like to get in contact with us, but you don't know exactly who the right contact person is for your concern? Please fill out the following form with your request and we will be happy to answer you.

DENSO WAVE EUROPE GmbH
Parsevalstrasse 9 A
D-40468 Dusseldorf

 

info@denso-wave.eu
+49 (0)211 - 540138-40

Simply save the address in your smartphone.