GT20
| Model | Barcode Model | 2D Code model |
|---|
| Type | GT20B-SM (U) *1 | GT20B-SM (R) | GT20B-SB | GT20Q-SM (U) *1 | GT20Q-SM (R) | GT20Q-SB |
|---|
Scanner
| Method | Advanced Scan Plus (CCD) | Area Sensor |
Readable codes
| 2D Code | -
| QR code, Micro QR code, SQRC, IQRcode, DataMatrix (ECC200), PDF417, Micro PDF417, Maxi code, Aztec, GS1 Composite |
| Barcode | EAN-13/8 (JAN-13/8), UPC-A/E, UPC/EAN
(with add-on), Interleaved 2 of 5 (ITF), Standard 2
of 5 (STF), CODABAR (NW-7), CODE32, CODE39,
CODE93, CODE128, GS1-128 (EAN-128),
GS1 Databar (RSS), MSI, Plessey | EAN-13/8 (JAN-13/8), UPC-A/E, UPC/EAN
(with add-on), Interleaved 2 of 5 (ITF), Standard 2
of 5 (STF), CODABAR (NW-7), CODE39, CODE93,
CODE128, GS1-128 (EAN-128),
GS1 Databar (RSS)
|
Minimum resolution
| 2D Code | - | 0.167mm |
| Barcode | 0.125mm |
| Marker | - | Area guide marker |
| PCS value | not less than 0.30 |
| Angle | +/-50°C |
| Skew angle | - | 360° |
| Image capture | - | BMP, JPEG output, thumbnail view |
| Scanning confirmation | Con firmation LED (Blue, Green, Red), Buzzer (with 3-level volume control and 3-level tone control) |
| Communication interface | Method | USB | RS-232C | Bluetooth Ver. 2.1+ EDR based class 2 | USB | RS-232C | Bluetooth Ver. 2.1+ EDR based class 2 |
| Connector | USB connector (A type) | Dsub-95 | - | USB connector (A type) | Dsub-95 | - |
| Profile | - | - | SPP, HID | - | - | SPP, HID |
| Cable | 2m | 2m, 5m | - | 2m | 2m, 5m | - |
| Power | Supply | USB port *² | Separate AC adapter | Built-in battery | USB port *² | Separate AC adapter | Built-in battery |
| Operating time *3 | - | - | 100 hours | - | - | 28 hours |
Environment requirements
| Protection rating | IP65 |
| Drop resistance *4 | 2.0mx60 times on concrete floor |
| Operating temperature *5 | -20 - 50°C |
| Operating humidity | 10 to 90% RH (without dews) |
| Weight (excl. cable) | Approx. 180g | Approx. 230g (incl. battery) | Approx. 180g | Approx. 230g (incl. battery) |
*1: Two methods are supported: a USB keyboard interface and a USB-COM interface. The factory default is a USB keyboard interface for GT20B and a USB-COM interface for GT20Q.
*2: Please check the connection beforehand because this type of connection may not be possible depending on the model of the PC or USB hub.
*3: When a code is ready every 5 seconds.
*4: Result obtained in a test under regular temperature is shown and meant as a guarantee.
*5: For the Bluetooth® model, 0 to 40°C during battery charging
GT20QD
| 2D Code Model |
|---|
| RS-232C Model | USB Model |
| Model | GT20QD-SM(R) | GT20QD-SM(U) |
Scanner
| Readable codes
| 2D Codes | QR Code, micro QR Code, SQRC, iQR, PDF417, micro PDF417, MaxiCode, DataMatrix (ECC200), GS1 Composite
|
| 1D Codes | EAN-13/8 (JAN-13/8), UPC-A/E, UPC/EAN (with add-on), Interleaved 2 of 5, Codabar (NW-7), CODE 39, CODE 93, CODE128, GS1-128 (EAN-128), GS1 DataBar (RSS)
|
Minimum Resolution
| 2D Codes | 0.1 mm
|
| 1D Codes | 0.1 mm
|
Marker
| Visual (1 Color LED)
|
Communication interface
| Interface
| RS-232C | USB (COM, HID)*1 |
Connection Type
| Dsub-9 P | USB connector (type A) |
| Power supply | AC adapter |
Environmental requirements
| Protection rating | IP65G*2 |
Drop resistance*3
| 2.0 m x 6 times drop on concrete floor |
| Weight (excl. cable) | Approx. 210 g |
*1: USB (COM.HID) support 2 systems for USB keyboard interface and USB-COM interface.
*2: Comply with JIS C0920. Interface cable connector covers locked condition is guaranteed.
*3: This is a test value, not a guaranteed value.
