SE1 Series

SE1 Series

Excellent scanning performance of barcodes, QR Codes® or RFID-Tags

The handy pocket scanner is available either as barcode scanner, as a 2D version for reading QR Codes® or in its expansion - as SE1-BUB-C - also with the RFID technology. Consequently, it is usable in various application fields.

  • 2D Code
  • 1D Code

Do you have any questions?

You are interested in our products, but have some further questions. Click here to find a distributor in your area.

Find a distributor

"To me, sensitive data entry is a matter of trust. We have been using DENSO for two decades and nothing is going to change about that."

IT Decider, supermarket chain
  • 2D Code Model1D Code ModelRFID Model
    ModelSE1-QBSE1-BBSE1-BUB-C
    Scanner







    Reading SystemArea sensorAdvanced Scan Plus (CCD)
    Readable codes

    1D Codes

    EAN-13/8(JAN-13/8), UPC-A/E, UPC/EAN (with add-on), Interleaved 2 of 5 (ITF), CODABAR (NW-7), Standard 2 of 5 (STF), CODE39, CODE93, CODE128, GS1-128 (EAN-128), GS1 DataBar (RSS)

    EAN-13/8(JAN-13/8), UPC-A/E, UPC/EAN (with add-on), Interleaved 2 of 5 (ITF), CODABAR (NW-7), CODE32, CODE39, CODE93, CODE128, GS1-128 (EAN-128), GS1 DataBar (RSS), Standard 2 of 5 (STF), MSI, PlesseyEAN-13/8 (JAN-13/8), UPC-A/E, UPC/EAN (with add-on), Interleaved 2 of 5 (ITF), CODABAR (NW-7), CODE32, CODE39, CODE93, CODE128, GS1-128 (EAN-128), MSI, Plessey, GS1 DataBar (RSS)
    2D CodesQR Code®, Micro QR Code, iQR, SQRC®, PDF417, microPDF417, DataMatrix (ECC200), Aztec, GS1 Composite (EAN, UCC Composite) Maxi Code
    -

    Minimum resolution

    1D Codes0.125 mm
    2D Codes0.167 mm-
    PCS value0.3 or more
    Slope angle / Elevation angle

    +/- 50°
    Scan confirmation

    LED (blue, red), buzzer

    Tri-colour LED (blue, red, green), buzzer
    RFID






    Readable and writable RF tag
    -
    Tags compatible with ISO/IEC 18000-63 (Class 1 Gen2)
    Frequency-865.7 - 867.5 MHZ
    Channel width / number of channels-600 kHz / 4 ch
    Transmission output-500 mW e.r.p.
    Modulation method-PR-ASK
    Transmission rate-40 kbps
    Reading distance1-30 mm
    Communication interface

    InterfaceBluetooth Ver. 2.1 + EDR-based Class 2
    ProfileSPP, HID
    Power supply


    Power supplyAlkaline AA battery x2 or AA Eneloop® battery x22 x Eneloop® rechargeable batteries
    Charging method-The Eneloop® batteries can be charged inside or outside the main unit.
    Operating time50 hours2100 hours212 hours3
    Environmental requirements


    Protection ratingIPX2
    Drop resistance41.2 m x 6 times drop on concrete floor
    Operating temperature5-5°C to 50°C

    Weight (excl. batteries)Approx. 60gApprox. 70g

    *1: The scanning distance differs depending on the target tag. An AD-229r6 manufactured by Avery Dennison was used for evaluation. The scanning distance is for reference only and varies depending on actual conditions. 2: One scan every 5 seconds. 3: When an RFID tag is scanned every 5 seconds. 4: This is a test value at room temperature and is not guaranteed. 5: 0-40°C when charging batteries.

    • Setting software (Scan Tune App)
      Software application to prepare parameter setting codes for SE1 series on PC
      * Download available via QBdirect.
  • Components

    • Main unit
    • Operation guide (provided with setup code menu)

    Accessories (sold separately)

    • Single charger CH-SE11 (for SE1-BUB-C only)
    • Hand strap (HSSE1)
    • Lanyard (NSBHT-1300)
    • Silicon cover, black (SCSE1-2)
    • Silicon cover, clear (SCSE1-1)
    • Bluetooth Communication Unit (BA20-RU)