PRODUCT FEATURES
Installation on existing POS system.
Our UR20 system consists of a small controller and a thin antenna, making it easy to install on an existing POS system. We also offer a special antenna mounting that supports the installation of the antenna.
No reading of products at neighbouring checkouts.
The communication range is approximately 80 cm, which is ideal for use at POS tills. To avoid reading RFID tags at neighbouring tills, the communication range can be freely adjusted according to the environment.
Extend the reading range with two antennas.
Our UR20 system allows two antennas to be connected to one controller, extending the reading range and increasing the application possibilities for customers.
Optimal for warehouse access gates.
With a communication range of approximately 2.5 metres, our UR20 system is ideal for installation at warehouse access gates. It can even smoothly read RFID tags placed close to the bottom of the load. A circularly polarised antenna enables 360-degree reading of RFID tags, so users don't have to worry about tag orientation.
Multiple devices can be controlled from a single PC.
By using an Ethernet interface, multiple devices can be controlled from a single PC, even if they are remote from each other.
Easy installation in different locations.
Our UR20 system can be easily installed in different locations. The combination of a small controller and a thin antenna makes it easy to find a suitable installation location. The antenna can also be attached to a VESA-compliant stand using VESA-compliant screw holes and supplied screws.
Communication
Readable and recordable RF tag : ISO/IEC 18000-63 TypeC (EPC Global Class1 Gen2) - supported tag
Frequency (EU) : 865.7 - 867.5 MHz
Channel width / number of channels : 600 kHz / 4 ch
Transmission power : 500 mW ERP
Modulation method: PR-ASK
Transmission rate : 40 kbps
Reading range*2: 0 - 800 mm (Avery Dennison AD-826) - UR21-MR-01*1 ; 0 - 2500 mm (Avery Dennison AD-229r6) - UR22-MR-01*1
Power adjustment: 5 - 23 dBm
*1: Do not attach an antenna, controller or cable that is not specified by DENSO WAVE.
*2: Network range may vary depending on the target tag. The network range is a reference value and may vary depending on the actual environmental conditions.
Physical characteristics
Dimensions (mm) :
- Control: 90 x 108.5 x 31 mm
- Antenna: 200 x 200 x 17.5 mm
Weight (g) :
- Control unit: approx. 130g
- Antenna: approx. 360g (UR21-MR-01*1) ; approx. 400g (UR22-MR-01*1)
Components :
- Control unit : 1 (incl. a back cover and screws for the back cover)
- Antenna : 1 (with VESA-compliant screw holes)
- Antenna cable : Double-end RF Connector (GT27) cable (200 cm long)
- Safety screws for the antenna : 4
*1: Do not attach an antenna, controller or cable that is not specified by DENSO WAVE.
PRODUCT FEATURES
Installation on existing POS system.
Our UR20 system consists of a small controller and a thin antenna, making it easy to install on an existing POS system. We also offer a special antenna mounting that supports the installation of the antenna.
No reading of products at neighbouring checkouts.
The communication range is approximately 80 cm, which is ideal for use at POS tills. To avoid reading RFID tags at neighbouring tills, the communication range can be freely adjusted according to the environment.
Extend the reading range with two antennas.
Our UR20 system allows two antennas to be connected to one controller, extending the reading range and increasing the application possibilities for customers.
Optimal for warehouse access gates.
With a communication range of approximately 2.5 metres, our UR20 system is ideal for installation at warehouse access gates. It can even smoothly read RFID tags placed close to the bottom of the load. A circularly polarised antenna enables 360-degree reading of RFID tags, so users don't have to worry about tag orientation.
Multiple devices can be controlled from a single PC.
By using an Ethernet interface, multiple devices can be controlled from a single PC, even if they are remote from each other.
Easy installation in different locations.
Our UR20 system can be easily installed in different locations. The combination of a small controller and a thin antenna makes it easy to find a suitable installation location. The antenna can also be attached to a VESA-compliant stand using VESA-compliant screw holes and supplied screws.
Communication
Readable and recordable RF tag : ISO/IEC 18000-63 TypeC (EPC Global Class1 Gen2) - supported tag
Frequency (EU) : 865.7 - 867.5 MHz
Channel width / number of channels : 600 kHz / 4 ch
Transmission power : 500 mW ERP
Modulation method: PR-ASK
Transmission rate : 40 kbps
Reading range*2: 0 - 800 mm (Avery Dennison AD-826) - UR21-MR-01*1 ; 0 - 2500 mm (Avery Dennison AD-229r6) - UR22-MR-01*1
Power adjustment: 5 - 23 dBm
*1: Do not attach an antenna, controller or cable that is not specified by DENSO WAVE.
*2: Network range may vary depending on the target tag. The network range is a reference value and may vary depending on the actual environmental conditions.
Physical characteristics
Dimensions (mm) :
- Control: 90 x 108.5 x 31 mm
- Antenna: 200 x 200 x 17.5 mm
Weight (g) :
- Control unit: approx. 130g
- Antenna: approx. 360g (UR21-MR-01*1) ; approx. 400g (UR22-MR-01*1)
Components :
- Control unit : 1 (incl. a back cover and screws for the back cover)
- Antenna : 1 (with VESA-compliant screw holes)
- Antenna cable : Double-end RF Connector (GT27) cable (200 cm long)
- Safety screws for the antenna : 4
*1: Do not attach an antenna, controller or cable that is not specified by DENSO WAVE.
DENSO.
At a glance.
1949
Foundation of DENSO Corporation
164.000
Employees worldwide
$47,2 bn
Consolidated net sales fiscal year 2023
3
Stock Exchange Listing Tokyo, Osaka & Nagoya
190
Subsidiaries worldwide
Would you like to contact a sales partner directly? Gladly. We are very close to you.
You can also simply fill out the contact form and we will get back to you as soon as possible.
Thank you and see you soon!
